Friday, August 24, 2012

Brake Oil


Brake fluid brake system relies on to work. Brake oil Volume in the reservoir tube can be used to find out the thickness of the brake shoes, other than an irregularity on the system. Brake shoes shrinkage is proportional to the shrinking oil brakes regularly. While drastic shrinkage oil brake there is leakage on the harbinger of brake system. one problem which can reduce the performance of brake oil is water contamination. This moisture lowers the boiling point of brake oil. But the lower the boiling point, the lower is the ability it works.
Unfortunately  moisture content in oil brake can only be known with the assay, which is using a wet boiling tester. This examination is carried out once a year with a record of the entire brake system works well. Brake oil also is hygroscopic which easily absorbs moisture from the air. Contact with air it could happen at any time, starting from the initial opening of the brake fluid, packaging up air infiltration due to the lack of meeting lis between the car brake system components. Moisture contamination can also occur due to car owners are too diligent uncapped reservoir to see his condition. So we recommend that you close the reservoir only opened to add brake oil less.

Read also other posts on Garmin C550, BlackBerry Bold Car Cradle and Fluid in the Car

Radiator Coolant


Liquid cooling or water radiators also must be checked. Is the volume, because water is likely to be reduced as a result of evaporation radiators or a leak in the system. The quality of the water in the radiator can be seen from its colour. If it looks cloudy or Brown, you should do a replacement or water draining the radiator. Because of the murky water radiator already contaminated rust, thereby lowering the ability of cooling liquid.

Read also other posts on Garmin C550, BlackBerry Bold Car Cradle and Fluid in the Car

Car Oil


Task engine oil is lubricate and cool the internal components that move. The movement of a component requires oil pretty quickly and always in a good healthy condition. How to check, before the car is turned on in the morning, pull the oil dipstick and clean. Enter and then pull back. See and feel the oil sticking to the dipstick. Oli must be digaris maximum. Don't get less, but avoid filling it up anyway exceeded this maximum. The characteristics of the oil had been bad in between is a blackish color already (murky). And if digesekkan on the fingertips will feel rough. Taste is a sign that crude oil had already a lot of powder containing metal and dirt.

Fluids in Car


Fluids are in the various systems in the car had a very important role. Radiator coolant, engine oil and transmission fluid, and brake fluid that constitute the most is in the car. The main thing is to be controlled from a variety of fluid this is volume. Make sure the amount in accordance with the limits prescribed by the manufacturer. Usually marked with “Full” (full).
But aside from volume, or conditions must also review its quality. Because it affects the ability of the working fluid. Adabeberapa characteristics of liquid damage can be seen directly by the owner of the car.
But there are also new ones can be known by testing using a special tool. Here are a few examples.
1. Oli
2. Brake oil
3. Water Radiator

Read also other post on Kawasaki GPS Motorcycle, Car Audio Equalizer and Kenwood Car Audio package.